The choice of heavy bamboo floor is finer than that of ordinary bamboo floor. It usually uses bamboo of more than four years ( other similar bamboo species) as material. After selection, cooking, drying, hot pressing, etc. Through a series of strict process production.

Heavy bamboo floor is divided into hot pressed heavy bamboo floor cold pressed heavy bamboo floor. Cold pressing is to dry the appropriate bamboo wire to a lower moisture content immerse it in the rubber, then dry it, install the mold, then press the blank. After locking, it is placed in a constant temperature space for thermal curing. After forming the blank, it is cut to balance the moisture. In this way, the slab can be finished on the coating line.

Hot pressing is to dry the bamboo material, dip the glue dry it without pressing the mold, then apply pressure heat to cure it once. After forming the blank, it is cut cut to balance the moisture to complete the blank then painted. In cutting, cold pressing is basically a square material, with a size of about 1860 × 104 × 140mm, which is basically such a square material. Press the paper with the width of 1860 × 1260 × 35mm / 45mm, then cut the relevant conventional specifications.