Heavy bamboo floor, originated bamboo, is superior to wood. The unique bamboo culture of the product shows the unique charm of the East. Its sustainability renewability make a great contribution to environmental protection.

The heavy bamboo floor is one of the bamboo floors. The bamboo floor is a new type of building decoration material. It is made of natural high-quality bamboo. After more than 20 processes, it takes off the original bamboo juice, collapses presses under high temperature pressure, then goes through multi-layer paint, finally is dried by infrared ray.

Heavy bamboo floor is widely used in hotels, villas, clubs, office buildings, shopping malls, theatres, sports venues, amusement parks other fields. So, what are the characteristics of heavy bamboo floor?

1. Better density: the density of high weight-resistant bamboo is more than 1.2g/cm3, now the widely used anticorrosive wood Pinus sylvestris var. mongolica can only reach 0.4g/cm3, so can pineapple, teak, etc.

2. Better strength: the static bending strength of high weight-resistant bamboo is more than 220MPa. Under the same thickness, the impact resistance is 7-10 times that of Pinus sylvestris var. mongolica, which can achieve better performance with less materials.

3. Better weather resistance: according to the national standard method of 28 hour cycle test, the water absorption thickness expansion rate is within 5%, according to 72 hour boiling water cooking test, the water absorption thickness expansion rate is within 10%, the water absorption expansion rate of the target product can be controlled, so that the outdoor product warpage, cracking other concerns no longer exist.

4. better anticorrosive property: Anticorrosion achieves national standard I grade. In laboratory anti-aging test, the service life is more than 20 years.

5. Better environmental protection: bamboo cutting will cause damage to the ecological environment, material acquisition is environmentally sustainable, no harmful substances are added in the processing process, the main process is physical changes, the formaldehyde emission of phenolic resin adhesive added is less than 0.2mg/100g, even less than the European E1 standard of 0.5mg/100g, so the outdoor environmental protection is synchronized with the indoor environment.