1、 Before paving, the bamboo floor shall be unpacked placed on site one week half a month in advance to keep the humidity of the bamboo floor consistent with that of the construction site before installation, which can effectively control the expansion coefficient after paving.

2、 The floor shall be installed in parallel with the light entering angle of the window, the bamboo floor of the corridor room with smaller area shall be installed in parallel with the longer wall, so as to reduce the number of sawed short splicing save materials.

3、 Bamboo floor is a natural material, its color texture are different, which cannot be completely consistent. In addition to the careful color separation packaging of the floor manufacturers, please make appropriate allocation of the color, texture, length, etc. of the floor during construction to make the floor more natural.

4、 The installation ground must be flat dry.

5、 The service life of bamboo wood floor is very long. It is recommended to lay keel for installation, so the installed floor is easy to loosen after long-term use.

6、 The keel must be dry. The specification of keel is about 30mm × 30mm, the length can be determined according to the room size. After the keel is positioned, the keel shall be fixed on the ground with cement nails. After the keel is fixed, a layer of moisture-proof film shall be paved on it.

7、 In humid particularly humid areas, such as East China South China, the floor should be assembled too tightly, please reserve a 0.5mm space. In the dry cold areas, such as northeast Northwest China, the natural joint between the floors is better.

8、 There should be more than 8mm reserved joints between the floor the wall.

9、 After drilling holes on the common slot of the floor with an electric drill, the special floor nails shall be nailed to the keel at a 45 degree angle, air nails shall be used.

10、 After the installation of the board, the floor wax should be applied immediately. Pay attention that the floor wax can only be applied in the gap, on the floor surface.